Course Outline for: 40-Hour HAZWOPER (29 CFR 1910.120) Online-Special GSA Pricing

Click here to register                                                                                             Download The Hands-On Schedule

Duration: 32 Hours On-Line, 8-hours in-person training

Prerequisites: None

Completion Requirements: Students will be allowed to proceed at their own pace in this interactive, on-line training program. Students must complete a total of 32 hours of on-line training and 8-hours in-person at a Compliance Solutions training course (see the last page of this outline for tentative dates and locations). After the practical training is complete, students will be required to pass a final exam with a test score of 70% or better.

Who Should Take This Course?: The Hazardous Waste Operations and Emergency Response Standard (HAZWOPER) applies to five distinct groups of employers and their employees. This includes any employees who are exposed or potentially exposed to hazardous substances-- including hazardous waste--and who are engaged in one of the following operations as specified by 1910.120(a)(1)(i-v) and 1926.65(a)(1)(i-v): 

  • clean-up operations--required by a governmental body, whether federal, state, local, or other
    involving hazardous substances-- that are conducted at uncontrolled hazardous waste sites; 

  • corrective actions involving clean-up operations at sites covered by the Resource Conservation
    and Recovery Act of 1976 (RCRA) as amended (42 U.S.C. 6901 et seq.); 

  • voluntary clean-up operations at sites recognized by federal, state, local, or other governmental
    body as uncontrolled hazardous waste sites; 

  • operations involving hazardous wastes that are conducted at treatment, storage, and disposal
    facilities regulated by Title 40 Code of Federal Regulations Parts 264 and 265 pursuant to
    RCRA, or by agencies under agreement with U.S. Environmental Protection Agency to
    implement RCRA regulations; and 

  • emergency response operations for releases of, or substantial threats of release of, hazardous
    substances regardless of the location of the hazard. 

Examples of the above would be individuals involved in the following: Removal or handling of underground tanks and/or piping, contaminated soil and/or groundwater, subsurface investigations, construction work in which hazardous materials may potentially be present, encountered, prepared, packaged, labeled, marked, stored, shipped for disposal, and for any facility wherein hazardous wastes are treated, stored, or disposed. Personnel who are involved in the above disciplines are required to have initial and recurrent training.

Click here to register

To see OSHA's View, Click Here.

Additional Equipment: Included as part of your training course, Compliance Solutions will provide each student a "Dress-Out Pac" shipped via 3 day Federal Express. Each package will contain the following:

    • 1-Student Dressout Manual

    • 1-HAZWOPER Manual on CD ROM for quick reference after the course is complete.

    • 1-Tyvek

    • 1-Half Face Respirator

    • 2-Organic Vapor Respirator Cartridges

    • 1-Pair Gloves

    • 1-Respirator Wipe

Using the above materials, students will complete 8-hours of dress-out exercises and hands-on demonstrations to complete OSHA's mandated training requirements. Students will receive a free respirator fit test along with this course.

Objective: The purpose of this course is to ensure awareness and promote safety among employees who may be exposed to chemical hazards in the work-site. The objective is to ensure that employees operate in the safest possible manner in situations where contact with potentially hazardous materials is likely.

At the conclusion of this module, students will:

  • Understand how hazardous materials are handled, identified, and human responses to exposure

  • Learn the importance of the Health and Safety Plan (HSP)

  • Incorporate the knowledge of what to do in case of site emergencies

  • Use appropriate safety methods and work practice controls

  • Recognize signs and labels that are used to alert personnel of danger involving hazardous material

Course Outline and Table of Contents: HAZWOPER (Hazardous Waste Operations and Emergency Response) is at the intersection of three Federal regulatory agencies (EPA, OSHA, DOT) and includes several career fields (science, technology, engineering, medicine, toxicology, law, psychology, organizational management, loss prevention, QA/QC, construction, waste management, etc.).

The two main objectives of HAZWOPER Operations are to:

1. Control or eliminate the potential hazards and/or losses.
2. Protect the health and safety of workers, the public, and the environment.

Compliance Solutions 40-Hour Online Course meets OSHA requirements for training of personnel engaged in hazardous waste operations as outlined in 29 CFR 1910.120, including removal or handling of underground tanks and/or piping, contaminated soil and/or groundwater, subsurface investigations, construction work in which hazardous materials may potentially be present, encountered, prepared, packaged, labeled, marked, stored, shipped for disposal, or any facility wherein hazardous wastes are treated, stored, or disposed.

Questions??? Call 1-800-711-2706
Click here to register
 
Download The Hands-On Schedule
Course Outline

Chapter 1 - Agencies, Laws and Regulations
Hazardous Materials Regulatory Overview
OSH Act
OSHA, EPA, DOT, NIOSH
CERCLA, SARA, RCRA, TSCA

Chapter 2 - Understanding the Hazard Communication Standard (29 CFR 1910.1200)
Background Information
"Employee Right to Know" Rule
How the Standard Works
Written Hazard Communication Program
Material Safety Data Sheet (MSDS)
Employee Information and Training

Chapter 3 - HAZWOPER Training
OSHA Regulation for Training
Training Sessions
Written Programs
HAZWOPER Training Requirements
Site Supervisors
Refresher Training
Treatment, Storage and Disposal (TSD) Facility Training
Emergency Response Personnel Training
First Responder Awareness Level (FRA)
First Responder Operational Level (FRO)
Hazardous Material Technician Level
Hazardous Materials Specialist Level
Hazardous Materials Scene Manager

Chapter 4 - Principles of Safety
Causes of Accidents
Kinetic/Mechanical Injuries
Fall Protection
Stairways or Ladders
Machine Guarding
Ignition Sources and Static Electricity
Lockout/Tagout
Controlling Energy Sources
Biological Hazards
Head Protection
Eye and Face Protection
Foot Protection
Hearing Protection
Heat Related Illnesses

Chapter 5 - Toxicology
Limits of Exposure
Routes of Exposure
Measure of Exposure
Dose-Response
Toxic Products
Toxin Chart

Chapter 6 - Planning and Organization
Planning a Safe Worksite
Organizational Structure
Management's Safety Commitment
Written Workplan
Health and Safety Plan
Emergency Response Plan
Safety Meetings and Inspections
Training Programs

Chapter 7 - Preparation for Fieldwork
Permits
Utilities
Initial Site Visit
Site Characterization
Locating Services
Traffic and Parking Restrictions
Site Security
Mud, Soil, Drums and Site Cleanup
Steam Cleaning
Site Facilities
Subcontractors
Drilling
Health and Safety Plans

Chapter 8 - Chemical Hazard Identification Systems
Hazard Descriptions
Explosives
Gases and Vapors
Liquified Gas
Health Hazards of Gas
Flammable Liquids
Fire Hazards
Flammable Solids
Oxidizers
Toxins and Poisons
Carcinogens
Corrosives
HAZCOM
National Fire Protection Association (NFPA 704 code)
Department of Transportation Classification
Hazardous Materials Identification System (HMIS)
Shipping Papers and Manifests

Chapter 9 - Understanding Radiation Safety
Atoms
Radiation
Ionization
Ionizing Radiation
Alpha and Beta Particles
Gamma Rays, X Rays, and Neutrons
Natural Background Radiation
Man-Made Sources of Radiation
Radioactive Waste
Radioactive Decay
Interaction with Matter
Measurement of Radiation
Radiation Detection Instruments
Radiation Exposure
Health Effects of Radiation Exposure
Chronic and Acute Exposure
Risks of Exposure
Protection and Shielding

Chapter 10 - Respiratory Protection
Classification of Materials Present in Air
Health Effects of Oxygen-Deficiency
Important Terms
Controls
Written Program
Ignition Sources and Static Electricity
Lockout/Tagout
Medical Evaluation
Respirator Training
Employer Responsibility
Selection of Respirator Protection
Choice Considerations
Types of Respirator Protection
Advantages and Disadvantages
Air Purifying Respirator (APR)
Particulate Respirators
Canister or Cartridge
Cartridge Maximum Use
Powered Air Purifying Respirators (PAPR)
Atmosphere Supplying Respirators
Hose Mask Respirators
Air Line Respirators
Self-Contained Breathing Apparatus (SCBA)
Breathing Air Quality
Respirators for IDLH atmospheres
Protection Factors
Proper Use
Fit Testing
Testing Methods
When a Respirator is Needed
Extreme Temperatures
Inspection, Storage, Maintenance, and Repair
Air Cylinders

Chapter 11 - Personal Protective Equipment
PPE Decision Making
Types of Protection
Levels of Protection
Descriptions of Levels A, B, C, D
Materials and Quality of Construction
Fire and Heat Protection
Understanding PPE Limitations
Health Considerations
Inspection and Maintenance

Chapter 12 - Air and Environmental Monitoring
Initial Site Survey
Principles of Gas
Preliminary Onsite Evaluation
Procedures for Atmospheric Monitoring
Organic Vapors and Gases
Radiation
Oxygen Deficiency, Oxygen Enrichment, Combustible Gases, and Visual Observations
Initial Entry and Surveys
Priority for Initial Entry Monitoring
Periodic Monitoring
Ambient Atmospheric Concentrations
Vapor Density
Direct Reading Instruments
Air Monitoring Instrument Data
Air Monitoring Equipment
Equipment Certification
Reliable and Useful Results
Calibration and Relative Response
Types of Direct Reading Instruments
Combustible Gas Indicator (CGI)
Toxic Atmosphere Monitors
Colorimetric Indicator Tubes
Photoionization Detector Tubes (PID)
Flame Ionization Detectors (FID)
Organic vapor Analyzer (OVA)
Aerosol Monitors

Chapter 13 - Sampling and Packaging
Sampling Objectives
Classification of Samples
Quality Assurance/Quality Control (QA/QC)
Location of Sampling Sites
Sampling Methods and Data
Liquid Samplers
Solid Samplers
Cleaning and Storage Procedures

Chapter 14 - Fire Protection
Requirements
Fire and Extinguisher Identification
Extinguisher Types and Maintenance
Location of Extinguishers
Additional Fire Fighting Equipment
Fire Fighting Foams

Chapter 15 - Handling Drums and Containers
Drum Inspection
Drum Identification
Drum Handling
Drum Contents
Lab Pacs
Opening Drums
Drum Sampling
Content Characterization
Drum Staging
Bulking
Shipment
Special Case Problems

Chapter 16 - Confined Space Hazards
29 CFR 1910.146
OSHA Protection
Written Entry Procedures
Personnel Affected by the Permit-Required Confined Space Standard
Hazardous Atmospheres
Toxic Vapors and Gases
Flammable Atmospheres
Atmospheric Testing
Ventilation
Other Hazards
Requirements for Entering Permit-Required Confined Spaces
Non-Permit Confined Spaces
Entrance into Permit-Required Confined Spaces
Safeguarding Confined spaces
Isolation, LO/TO
Evacuation from a Confined Space
Site Security

Chapter 17 - Site Emergencies
Incident Management and Scene Control
Site Safety Plan
Incident Command System
Incident Commander
Job Functions
Onsite Personnel
Site Leaders
Offsite Personnel
Federal Response Organizations
Emergency Training
Emergency Identification and Prevention
Onsite Communication
Site Mapping
Safe Distances
Refuges (Safety Stations)
Public Evacuation
Site Security and Control
Personal Locator Systems
Evacuation Routes
Decontamination
Emergency Equipment
Medical Treatment and First Aid
Emergency Response Procedures
Rescue/Response Action
Evaluations
Follow-up
Documentation

Chapter 18 - Decontamination Procedures
29 CFR 1926.65
Basic Decontamination
Site Selection and Management
Planning for Decontamination
Setting Up the Decontamination Area
Decontamination Methods
Decontamination Procedures
Decontamination Process
Analysis of Decontamination
Decontamination Process Charts for Levels A, B, and C

Chapter 19 - Medical Surveillance
OSHA Medical Requirements
Developing a Medical Program
Recommended Medical Examination Chart
Medical Program Effectiveness
Medical Program Development
Occupational and Medical History
Ability to Work While Wearing PPE
Tests Performed by Occupational Physicians
Periodic Medical Examinations
Emergency Treatment
Non-emergency Treatment

Will this course meet my training requirements?: Per OSHA's interpretations of December 11, 1994, a few guidelines need to be followed in order for the training to be considered in compliance:

"OSHA regulations require that an instructor have the minimum education and or experience with hazardous materials to teach this course" This course was developed by the Compliance Solutions training staff. Our combined instructor experience spans over 150 years of training, development and on-site experience. Additionally, we train over 12,000 students EACH YEAR so you can be assured of a quality training program.

"In order for the training to be effective, trainees must have the opportunity to ask questions." Unlike other on-line training firms, Compliance Solutions provides several ways to have your questions answered;

  1. Students may speak directly to their instructor during office hours via the "Chat" feature in each course. Simply select the "Chat" tab and your instructor will answer your questions on-line!!!

  2. You can send an email to us via the Instructor Email function anytime you have a question.

  3. Email another student in the "Email" section of the course.

  4. If you still have any questions while taking this training, please call our course Hotline listed in the syllabus and speak to the "On-Line Instructor". Office hours are Monday-Friday, 8 AM-5 PM Monday-Friday, MST.

"The trainees' mastery of covered knowledge and skills must also be assessed." Unlike some "prepackaged" training courses, you can be assured that your students will receive training that not only tests their skills but keeps them interested as well. We employ a "modular training methodology" that continually tests and re-tests the student's knowledge. A final exam is required in order for the student to receive a Certificate of Completion.

"Hazardous waste operations can involve many complex and hazardous tasks. It is imperative that employees be able to perform such tasks safely. Thus, auditing of worker performance is required for all types of HAZWOPER training. The employer may determine that hands-on training is unnecessary for a given refresher course. However, if an employer elects not to use hands-on training in their refresher course, the employer must first assess the employees' skill level, and ensure that workers remain competent in their current and any newly assigned duties." While this training course is very comprehensive, we highly recommend that additional site-specific training be taken for certain hazardous materials that may be encountered at different sites. Whether an employer provides training, contracts with an outside vendor to have the training completed, or has an employee trained by way of our internet training course, the responsibility of providing site specific training remains with the employer. If you are taking our course, or any other, it must always be remembered that OSHA requires training in site specific hazards, PPE and company safety plans. At the completion of this and every other training class, Compliance Solutions recommends that these items be reviewed with your employee.

 

Completion Instructions and Checklist

40-Hour HAZWOPER Online

Please read the following information carefully, you will need it to complete your course.

  1. All students must complete an initial 32 hours of on-line training.

  2. You can check the time you have accumulated by clicking the "Gradebook" section of the course. Simply select "User Activity" to display the number of minutes completed.

  3. All Students must complete 8 hours of "hands-on" training.

In order to comply with OSHA regulations, you will also need to attend a session with Compliance Solutions where we will cover dress-out procedures and do mock demonstrations of situations you may encounter in the field. This session must be attended to complete the course. Use the following checklist to complete your course.

40-Hour Course Completion Checklist

_____ Complete a minimum of 32 hours of training online.

_____ Review the list of cities on the next page to decide where to take the hands-on portion of the class.

_____ Call us on Monday !!!!

Contact our sales department at 1-800-711-2706, Ext. 1, the MONDAY BEFORE the class is being held. Classes are only held when there is sufficient enrollment (we may cancel classes due to insufficient enrollments) we will only accept reservations THE MONDAY immediately before the class. Any reservations received after Monday will not be accepted. We will not accept future reservations for classes that have not been confirmed. ( Example: If you are interested in attending the 8 hour dress-out on Friday, October 5th in Las Vegas, you must register on Monday, October 1st.)

(Please note that we do not provide travel or sleeping accommodations at the training class, these will need to be handled by yourself or your company.) The hands-on portion of the training is approximately 8 hours and is usually held on a Friday.

_____ Bring this manual with you to class to complete your course.

_____ Write in your Internet Training Code: ________________

At the conclusion of the session, you will need to ask the instructor for your "Internet Training Code" You will be asked for this code as a condition of your final exam. Please write down the code and do not lose it!!!. Our office cannot issue you a new number.

_____ After you have completed the hands-on portion of the class, go back and take your final exam. You will be asked for the above code to complete the exam. After you complete your exam, we will ship all paid students a Certificate of Completion.

For questions, please call us at 1-800-711-2706 Ext. 1

Please Download The Hands-On Schedule determine the closest place to finish your training.

Click here to register

 

The contents of web publications in the csregs.com and related domains are Copyright ©; 1999by Compliance Solutions Occupational Trainers, Inc., Compliance Solutions Vocational Trainers, Inc, and Compliance Solutions Training Group., unless otherwise noted.  The Compliance Solutions Logo is a Registered Trademark of the Compliance Solutions Group; All rights reserved.